GGU-SLICE: "System legend" menu item

You can alter the visualisation of the slope system and the analysis results represented within it by means of the following dialog box.

Open

The visualisation is activated using the "Show system" check box and for the coordinates defined in "x", "y", "Width" and "Height". The visualisation can be varied further by way of the "Presentation width" factor as well as the "Font size". The fastest way to modify the position of the legend is to press the [F11] function key and then to pull the legend to the new position while holding the left mouse button

If the "Coloured system" check box is activated, the visualisation will use the soil colours defined in "Graphics preferences/Pen colour and width" or, in multi-layer systems, in "Output preferences/Soil properties legend". If you also activate the "Pore water pressure with colour fill" check box, the area between the pore water pressure line and the selected slip surface will be colour-filled. The colours can be edited in "Graphics preferences/Pen colour and width".

In multi-layer systems, the soils are labelled with the corresponding names if the "Enter soil names" check box is activated. A different font size can be used for the soil names than for the remaining labelling. For a wave pressure analysis it is possible to activate an additional "Force polygon with values" check box.