GGU-FOOTING: Enter analysis options (Example 1)

Select the menu item "File/New". When the program is started the check boxes "Partial safety factor concept (EC 7)" and "Multiple footings" are already activated. Alternatively, the standard and the analysis mode can be selected by going to the menu item "Edit/Analysis options".

Open

After confirming with "OK" you can select the load case. Choose "DS-P". The partial safety factors are used in the system data.

You can enter a project identification for the current problem, which is subsequently shown in the General legend. A project identification is entered when selecting the type of system in the above dialog box or via the "Edit/Project identification" menu item.