GGU-DOLPHIN: Selecting the output format (Print output table)

For both options (as graphics or ASCII), you will see an additional dialog box prior to output table visualisation, in which you specify how detailed the output is for the analysis results and which is shown below for an analysis after Blum:

Open

To shorten the output table slightly, you can reduce the number of output values by outputting only every nth value. Confirm your input with "OK".

In addition to the information that is generally displayed in the output table (for example, the required working capacity and, if applicable, the associated equation used for analysis), you can use the lower check boxes in the dialog box to activate the additional display of selected parameters according to the selected type of analysis.