GGU-COMPACT: Input for 'No container database available'

If no container database is available, you will see the following test data input dialog box:

Open

Five tests are already present in this example. The following buttons can be used:

"Done"/"Cancel"
You will arrive back at the menu bar with or without accepting your input or changes.

"Sort"
The tests can be sorted according to Wet sample + Cylinder.

"x Tests to edit"
You can change the number of tests. A new single test will be generated at the end of the list allowing subsequent data input (see below). Reducing the number of tests will delete the single test at the end of the list.

"Show curve data"
The Proctor data (Proctor density and water content) for the entered individual tests are calculated and displayed in a message box. If over-coarse grain is present, the results with the over-coarse grain are displayed in an additional message box. The curve data are displayed in the bottom section of the form, if the corresponding object is activated (see menu item "Output preferences/Proctor densities", Section 5.2.7).

"Delete single test"
Select the number of the single test to be deleted in the dialog box.

"?"
Using the "?" button behind every input row the input data and test results corresponding to the single test are displayed in a message box.