GGU-STABILITY: Step 3: Define array (Ex. 1)
GGU-STABILITY: Step 3: Define array (Ex. 1)
Select the "Array" menu item from the "Editor 2" menu.
Activate the "Use array" check box. This ensures that the cross hairs snap onto these points during the following input with the mouse. This makes input of slope geometry easier. If you have a geometry which does not lend itself to being forced into such an array, do without activating the check box. Leave the dialog box with "OK". The array will be displayed after selecting one of the following menu items!
If you own a scanner, you can produce a bitmap file of the system to be processed. This bitmap file can be imported using "Graphics preferences/Mini-CAD toolbar" menu item (see the "Mini-CAD" manual). You can thus further simplify system input.
, multiple selections available,
Related content
GGU-STABILITY: Define search grid (Ex. 2)
GGU-STABILITY: Define search grid (Ex. 2)
More like this
GGU-STABILITY: Select analysis method
GGU-STABILITY: Select analysis method
More like this
GGU-STABILITY: Define centre-points (Ex. 2)
GGU-STABILITY: Define centre-points (Ex. 2)
More like this
GGU-STABILITY: Surface points (Ex. 2)
GGU-STABILITY: Surface points (Ex. 2)
More like this
GGU-STABILITY: Step 7: Enter soil properties (Ex. 1)
GGU-STABILITY: Step 7: Enter soil properties (Ex. 1)
More like this
GGU-STABILITY: Define slip bodies via editor (Ex. 2)
GGU-STABILITY: Define slip bodies via editor (Ex. 2)
More like this